Safety valve, Cleaning and maintenance, Cleaning – Powerplus POWX1750 COMPRESSOR 2200W OIL FREE EN User Manual
Page 8: Maintenance, Technical data, Noise
POWX1750
EN
Copyright © 2014 VARO
P a g e
| 8
www.varo.com
As soon as the tank pressure is built up, the motor switches off
automatically.
The motor switches automatically on as soon as the tank pressure
becomes too low.
8.4
Safety valve
The safety valve has been set for the highest permitted pressure of the pressure vessel. It is
prohibited to adjust the safety valve or remove its seal
Actuate the safety valve from time to time to ensure that it works when required. Therefore you
need to remove the protection cover.
9 CLEANING AND MAINTENANCE
9.1
Cleaning
Keep the safety devices free of dirt and dust as far as possible. Wipe the equipment with a
clean cloth or blow it with compressed air at low pressure.
We recommend that you clean the appliance immediately after you use it.
Clean the appliance regularly with a damp cloth and some soft soap. Do not use cleaning
agents or solvents; these may be aggressive to the plastic parts in the appliance. Ensure
that no water can get into the interior of the appliance.
You must disconnect the hose and any spraying tools from the compressor before
cleaning. Do not clean the compressor with water, solvents or the like.
9.2
Maintenance
The condensation water must be drained off each day by opening the drain valve (ref. 11)
10 TECHNICAL DATA
Type
POWX1750
Rated power
2hp
– 1500W
Current take-off
6.5A
Power supply voltage
220-240 V/50 Hz
Air intake
222l/min
Maximum pressure
10bar (145PSI)
Weight
22,2kg
Tank capacity
50l
Rotation speed
3400 min-1
Protection degree
IP20
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
77 dB(A)
Acoustic power level LwA
97 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).