Powerplus POWX1705 COMPRESSOR 1100W OIL FREE +ACC EN - Manual (Page 4)

POWX1705
EN
Copyright © 2014 VARO P a g e | 4 www.varo.com
 Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
 Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other cond ition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
 Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
4.5 Service
 Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5 SPECIFIC SAFETY WARNINGS
This symbol indicates warnings to be read before using the product so as
to prevent injury to the user.
Compressed air is a potentially dangerous form of energy; always take
great care when using the compressor and its accessories.
Warning: the compressor may restart when power is restored following a
blackout.
An ACOUSTIC PRESSURE’s value of 2 m. corresponds to the ACOUSTIC POWER’s value
stated on the yellow label located on the compressor, minus 14 dB.
5.1
Do’s
 The compressor must be used in a suitable environment (well ventilated with an ambient
temperature of between +5°C and +40°C) and never in places with dust, acids, vapors,
explosive or flammable gases.
 Keep the work area free. When operating, the compressor must be placed on a stable
surface.
 Safety goggles should be worn when using the compressor in order to protect the eyes
against any foreign bodies lifted by the jet of air.
 If possible, when using air-powered accessories, wear safety clothing.
 Always maintain a safety distance of at least 2 meters between the compressor and the
work area.
 Check for correspondence between the compressor plate data with the actual
specifications of the electrical system. A variation of ± 10% with respect of the rated value
is allowed.
 Insert the plug of the electrical cable in a socket of suitable shape, voltage and frequency
complying with current regulations.