Powerplus POWX1350 MULTI-FUNCTION SHARP ENER EN - Manual (Page 6)

POWX1350
EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
7.2 Knife and scissor sharpener
 Sharpens all straight edged knives and scissors
 Unique top for sharpening knives
 Precisely angled slot for sharpening scissors
SHARPENING KNIVES (2a-2c)
1.
Slide module ‘knife and scissor sharpener’ onto the power unit
2. Switch the Power Unit on
3. Hold the knife handle towards you and insert the blade into guide slot (2a)
4. As soon as the blade touches the grinding wheel, draw it with light steady pressure
across the wheel. Do not press to hard (2b)
5. Insert the second side of the blade into the other guide slot (2c) and repeat #4
6. Repeat sharpening each side until a clean sharp edge is attained.
7. Switch the Power Unit off. Before removing the module, ensure that the grinding
wheel has stopped.
SHARPENING SCISSORS (2d-2f)
1.
Slide module ‘knife and scissor sharpener’ onto the power unit
2. Switch the Power Unit on
3. Open the scissors fully
4. Slide the first scissor blade through the front guide slot (2d). Keep the pivot of the
scissors and other blade to the right side.
5. Draw the blade across the grinding wheel from pivot to tip. Use a light steady
pressure, do not press too hard (2e)
6. Remove and turn the scissor over to sharpen the second blade (2f)
7. Repeat if necessary, until clean sharp edges are achieved.
8. Switch the Power Unit off. Before removing the module, ensure that the grinding
wheel has stopped