Powerplus POWX102 HEAT GUN 1800W EN - Manual (Page 5)

POWX102
EN
Copyright © 2014 VARO NV P a g e | 5 www.varo.com
 Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned after
completing the work.
7 ASSEMBLY AND ADJUSTMENT
Prior to assembly and adjustment always unplug the tool
The air temperature can be adjusted to suit a wide range of applications. The table below
suggests settings for different applications.
Setting
Applications
Low
 Drying paint and varnish
 Removing stickers
 Waxing and de-waxing
 Drying wet timber prior to filling
 Shrinking PVC wrapping and insulation tubes
 Thawing frozen pipes
High  Welding plastics
 Bending plastic pipes and sheets
 Loosening rusted or tightly fastened nuts and
bolts
 Removing paint and lacquer
 Soldering plumbing joints
If you are not sure about the correct setting, start with a low temperature
setting and gradually increase the temperature until you achieve optimum
results
7.1 Mounting the correct accessory
This tool is supplied with a set of accessories for different applications
Icon
Description Purpose
Glass protection nozzle Protecting windows
when stripping frames
Spoon reflector nozzle Soldering pipes
Cone nozzle Welding, shrink
sleeving (heat
concentrated over
small area)
Fish tail surface nozzle Drying, thawing (heat
spread over wider
area)
Scraper Stripping paint and
varnish