Powerplus POWX083 CONCRETE/PAINT MIXER 1220W EN - Manual (Page 6)

POWX083
EN
Copyright © 2014 VARO NV P a g e | 6 www.varo.com
8 MAINTENANCE AND CLEANING
Attention !Before performing any work on the equipment, pull the power
plug.
8.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9 TECHNICAL DATA
POWX083
voltage / frequency 230-240 V / 50 Hz
Power: 1220W
Idling speed
1st gear 180-460 min-1
2nd gear 300-700 min-1
Mixer diameter: 120 mm
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 89 dB(A)
Acoustic power level LwA 100 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) 2,76 m/s² K = 1,5 m/s²
11 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
12 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.