Powerplus POWX0480 PALM SANDER 220W EN - Manual (Page 5)

POWX0480
EN
Copyright © 2014 VARO P a g e | 5 www.varo.com
The sandpaper should rest flush on the base plate and must not come loose.
You can be sure to find the right sandpaper among our product range (see technical
specifications).
7.3 Attaching the dust box
Slide dust collection box into the dust extraction port, make sure the latches on the right and
left of the dust collection box are into place before operating.
8 TECHNICAL DATA
Power rating 220W
Mains voltage 230-240V
Mains frequency 50Hz
Sanding surface 140 x 140 x 80 mm
No load speed 13.000 min-1
Weight 2 kg
Safety class Class II (double insulated)
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
77 dB(A)
Acoustic power level LwA 88 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration) 4,00 m/s² K = 1,5 m/s²
10 CLEANING AND MAINTENANCE
 The machine does not require any special maintenance.
 For safe and efficient working, always keep the machine and the ventilation slots clean.
 Always be sure that the tool is switched off and unplugged before carrying out any work on
the tool.
11 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
12 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.