Cleaning and maintenance, Keep tool clean, Technical details – Powerplus POWX0478 WALL AND CEILING SANDER 1220W EN User Manual
Page 8: Noise, Warranty, Powx0478, 10 cleaning and maintenance, 11 technical details, 12 noise, 13 warranty
POWX0478
EN
Copyright © 2013 VARO
P a g e
| 8
www.varo.com
10 CLEANING AND MAINTENANCE
10.1
Keep tool clean
Periodically blow out all air passages with dry compressed air. All plastic parts should be
cleaned with a soft damp cloth. NEVER use solvents to clean plastic pats. They could possibly
dissolve or otherwise damage the material.
Wear safety glasses while using compressed air.
Clean the vacuum swivel connector as too much dust will keep it from turning freely.
11 TECHNICAL DETAILS
Model nr.
POWX0478
Rated Voltage
230-240V
Rated Frequency
50Hz
Rated Power
1220W
Rotation speed
1500-2300min
-1
Disc Diameter
225mm
Protection class
II
Cable length
4m
Hose Ø
32mm
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
88
Acoustic power level LwA
99
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
4.9 m/s²
K = 1,5 m/s²
13 WARRANTY
This product is warranted for a 36-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding: batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not