Powerplus POWX044 FINISHING SANDER 330W EN - Manual (Page 2)

POWX044
EN
Copyright © 2012 VARO P a g e | 2 www.varo.com
FINISHING SANDER 330W
POWX044
1 APPLICATION
The sander is used to sand and buff wood, plastic and similar materials. It is very important to
use the correct sandpaper!
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION
1. Front-handle
2. On-/off switch
3. Lock button
4. Handle
5. Sanding paper
6. Base plate
7. Paper clamp
8. Dust bag
9. Power cord
10. Speed adjusting dial
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 Finishing Sander 330W
Dust bag
Set of spare cole brushes
10 x Sanding paper
manual
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the tool.
Wear eye protection
Read manual before use Wear noise protection