Powerplus POWX033 JIGSAW 600W EN - Manual (Page 6)

POWX033 EN
Copyright © 2012 VARO NV P a g e | 6 www.varo.com
7.6 Use of pendulum
See fig. 5
Position Cutting action Applications
0 Straight line cutting action For cutting mild steel, stainless steel and plastics.
For clean cuts in wood and plywood.
I Small orbit cutting action For cutting mild steel, aluminum and hard wood.
II Medium orbit cutting
action For cutting wood and plywood.
For fast cutting in aluminum and mild steel.
III Large orbit cutting action For fast cutting in wood and plywood.
8 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
8.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9 TECHNICAL DATA
Nominal voltage: 230-240V~50Hz
Power consumption: 600 W
Cutting rate: 800-3000 min-1
Stroke height: 18 mm
Cutting depth in wood: 65 mm
Cutting depth in plastic: 20mm
Cutting depth in iron: 8 mm
Mitre cuts: up to 45° (left and right)
Double isolation yes
Weight 2.1 Kg
10 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
84 dB(A
Acoustic power level LwA 96 dB(A
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration) 12.9 m/s² K = 1.5 m/s²