Powerplus POWX0074LI IMPACT WR ENCH 18V LI-ION ONE FITS ALL EN - Manual (Page 7)

POWX0074LI
EN
Copyright © 2013 VARO P a g e | 7 www.varo.com
 Slide the battery pack in the charger as shown in fig. 2. Make sure there is proper contact
with the charger.
 When charging the green is constantly lit and the red is flashing.
 When fully charged both lights will be constantly lit.
8.2 Inserting and removing the battery (Fig. 3)
 Remove the battery pressing the battery latches and at the same time pull the battery
pack off.
 To insert the battery, push the battery pack onto the contacts of the tool.
8.3 Switch on/off (Fig. 4)
 The impact wrench is started and stopped by depressing and releasing the ON/OFF
switch trigger (6).
 This impact wrench is equipped with an electric brake, when the ON/OFF switch trigger (6)
is released completely, the chuck stops immediately.
8.3.1 Switch lock
 The ON/OFF switch trigger (6) can be locked if the reverse switch (2) is in the center
position. (Fig. 5)
 This helps to reduce the possibility of accidental starting when not in use.
8.3.2 Direction of rotation (Fig. 6)
 To select forward rotation, release the on/off switch trigger (6) and push the reverse switch
(2) to left side of the tool.
 To select reverse rotation, push the reverse switch (2) to right side of the tool.
 When the reverse switch (2) is in center position, the ON/OFF switch trigger (6) is locked.
8.3.3 Variable speed
This tool has a variable speed ON/OFF switch trigger (6) that delivers higher speed and torque
with increased trigger pressure.
Speed is controlled by the amount of pressure on the ON/OFF switch trigger (6).
9 CLEANING AND MAINTENANCE
9.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DETAILS
Model nr. POWX0074LI
Rated voltage (direct current) 18V
Rotation speed 0-2200min
-1
Charging time +/-1 hour
Battery type 1500mAh Li-Ion
Charger rated voltage 230V