Powerplus POW726 SOLDERING GUN 175W EN - Manual (Page 6)

POW726 EN
Copyright © 2014 VARO 6 www.varo.com
8 WARRANTY

This product is warranted as provided by law for a 24 -month period effective from
the date of purchase by the first user.
 This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.

Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of
the tool.

Repairs may only be carried out by an authorised customer service centre for
Powerplus tools.
 You can always obtain more information at the number 00 32 3 292 92 90.

Any transportation costs shall always be borne by the customer, unless agreed
otherwise in writing.
 At the same time, no claim can be made on the warranty if the damage of the device
is the result of negligent maintenance or overload.
 Definitely excluded from the warranty is damage resulting from fluid permeation,
excessive dust penetration, intentional damage (on purpose or by gross
carelessness), inappropriate usage (use for purposes for which the device is not
suitable), incompetent usage (e.g. not following the instructions given in the manual),
inexpert assembly, lightning strike, erroneus net voltage. This list is not exhaustive.
 Acceptance of claims under warranty can never lead to the prolongation of the
warranty period nor commencement of a new warranty period in case of a device
replacement.
 Devices or parts which are replaced under the warranty therefore remain the
property of Varo NV.
 We reserve the right to reject a claim whenever the purchase cannot be verified or
when it is clear that the product has not been properly maintained. (Clean ventilation
slots, carbon brushes serviced regularly, etc.).

Your purchase receipt must be kept as proof of date of purchase.
 Your appliance must be returned undismantled to your dealer in an acceptably clean
state, (in its original blow-moulded case if applicable to the unit), accompanied by
proof of purchase.
9 ENVIRONMENT
Should your appliance need replacement after extended use, do not
dispose of it with the household refuse, but in an environmentally safe
way.
Waste produced by electrical machine items should not be handled like
normal household rubbish. Please recycle where recycle facilities exist.
Check with your Local Authority or retailer for recycling advice.