Powerplus POW403 TRIANGULAR SANDER 180W EN - Manual (Page 2)

POW403 EN
Copyright © 2014 VARO P a g e | 2 www.varo.com
TRIANGULAR SANDER
POW403
1 APPLICATION
The sander is intended for sanding and polishing of wood, plastic and coated surfaces. It is
particularly suitable for profiles, corners or hard-to-reach areas. It is very important to use the
correct sandpaper!!!! It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION
1. Sanding paper
2. Base plate
3. On/off switch
4. Dust extractor connection
5. Cable (2m)
3 PACKAGE CONTENT LIST
 Remove all packaging materials.
 Remove remaining packaging and packing inserts (if included).
 Check that the package contents are complete.
 Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
 Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
1pc machine
1pc manual
1pc dust adaptor
1x sand paper (G80)
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the tool.
Read manual before use
In accordance with essential
safety standards of applicable
European directives Class II - The machine is double
insulated; Earthing wire is
therefore not necessary.