Powerplus POW30633 DRILL/SCREWDRIVER 14,4V 2BATT 1H EN - Manual (Page 8)

POW30633 EN
Copyright © 2013 VARO P a g e | 8 www.varo.com
10 TECHNICAL DATA
POW30633
Voltage / frequency charging unit 230 V / 50 Hz
Rated Voltage 14.4 v
Rotation speed 0-550 min-1
Torque positions 20+1
Max. drill capacity 10 mm
Charger time 3/5 hours
Battery capacity 1200 mAh
Battery type Ni-CD
Max. torque 12 Nm
Drill capacity concrete /
Drill capacity steel 10 mm
Drill capacity wood 20 mm
Chuck type Sanou automatic keyless chuck
11 SOUND EMISSION
Noise emission values measured according to relevant standard.
Acoustic pressure level LpA 72 dB (A) K = 3 dB(A)
Acoustic power level LwA 83 dB (A) K = 3 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) 3,12 m/s² K = 1.5 m/s²
12 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
13 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.