Powerplus POW30620 DRILL/SCREWDRIVER 14,4V EN - Manual (Page 6)

POW30620 EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DATA
POW30620
Voltage / frequency charging unit 230 V / 50 Hz
Rated Voltage 14.4 v
Rotation speed 0-550 min
-1
Torque positions 20+1
Max. drill capacity 10 mm
Charger time 3/5 hours
Battery capacity 800 mAh
Battery type Ni-CD
Max. torque 10 Nm
Chuck type Keyless chuck
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
71 dB(A)
Acoustic power level LwA 82 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) Max 3,2 m/s² K = 1,5 m/s²
12 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
13 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.