Powerplus POW2086 ANGLE GRINDER 900W 125MM EN - Manual (Page 8)

POW2086
EN
Copyright © 2014 VARO p a g e | 8 www.varo.com
9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS AND
CUTTING WHEELS
9.1 Flange arrangements when using a depressed centre or straight grinding wheel
1 Clamping flange
2 Flange nut
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
10.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Lubrication
The machine does not require any specific lubrication.
11 TECHNICAL DATA
Voltage / frequency 220-240V / 50Hz
Power input 900W
No-load speed 13000/min
Disc diameter 125 mm
Spindle dimension M14