Powerplus POW1015 JIGSAW 650W EN - Manual (Page 6)

POW1015
EN
Copyright © 2013 VARO P a g e | 6 www.varo.com
7.3 Dust extraction
The jigsaw is equipped with a dust extractor socket. You can connect your vacuum cleaner to
the socket at the rear of the jigsaw. If you require a special adapter, please contact the
manufacturer of your vacuum cleaner.
7.4 Use of pendulum
Position Cutting action Application areas
0 Straight line cutting action For cutting soft steel and plastic
For clean cuts in wood and plywood
I Small orbit cutting action For cutting aluminium and solid wood
8 TECHNICAL DATA
Nominal voltage 230V-50Hz
Power consumption 650W
Cutting rate 0-2800 min-1
Stroke height 15 mm
Cutting depth in wood 80 mm
Cutting depth in plastic 25 mm
Cutting depth in steel 10 mm
Double isolation Yes
Weight <2,2kg
9 NOISE
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level LpA 83 dB(A)
Acoustic power level LwA 94 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration) Max 6.4 m/s² K = 1.5 m/s²
10 WARRANTY
 This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
 This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
 Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
 You can always obtain more information at the number 00 32 3 292 92 90.
 Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
 At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.