Lubrication, Carbon brushes, Mains cable & plug – Powerplus POWXQ5102 ANGLE GRINDER 950W 115MM EN User Manual
Page 10: Technical data, Noise emission, Storage, Powxq5102, 11 technical data, 12 noise emission, 13 storage

POWXQ5102
EN
Copyright © 2013 VARO NV
P a g e
|
10
www.varo.com
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2
Lubrication
The machine does not need any extra lubrication.
10.3
Carbon brushes
When excessive sparking occurs, or when the machine does not start or does not run
smoothly, please check the carbon brushes and replace them if necessary.(see above).
10.4
mains cable & plug
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by
a qualified specialist (qualified electrician).
11 TECHNICAL DATA
POWXQ5102
Mains voltage / Mains
frequency
230-240 V / 50 Hz
Rated Power:
950W
No load speed
10500 min-1
Max. disc diameter:
115mm
Drive spindle thread:
M 14
Weight (+/-):
2.08 Kg
Insulation class :
/ class II
Double insulated
12 NOISE EMISSION
Noise emission values measured according to relevant standard. (k=3)
POWXQ5102
LpA (Sound pressure level) :
91 dB(A)
LwA (Sound power level) :
102 dB(A)
ATTENTION! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
POWXQ5102
K =
aw (Vibration) :
10.6 m/s²
1.5 m/s²
13 STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Do
n’t keep it in plastic bags to avoid humidity build-up.