Petrol safety warnings, Unpacking and assembly, Unpack – Powerplus POWXG7540 LAWN SCARIFIER 118CC EN User Manual
Page 6: Assembly, Install the bottom handlebar, Install the top handlebar, Mount the grass bag, Operation, Pre-start inspection
![background image](https://www.manualsdir.com/files/832107/content/doc006.png)
POWXG7540
EN
Copyright © 2014 VARO
P a g e
| 6
www.varo.com
Examine the machine regularly and replace worn or damaged parts for safety;
If the fuel tank has to be drained, this should be done outdoors. The drained fuel should
be stored in a container specifically designed for fuel storage or it should be disposed of
carefully.
6 PETROL SAFETY WARNINGS
WARNING: Use extra care when handling fuels. They are inflammable and
the vapours are potentially explosive. The following points must be
observed.
Use only an approved container.
Never remove the fuel cap or add fuel when the engine is running. Allow engine exhaust
components to cool before refuelling.
Do not smoke.
Never refuel the machine indoors.
Never store the machine or fuel containers in places where there is a naked flame, such
as a water heater.
If fuel is spilt, do not attempt to start the power source before moving the machine away
from the spillage area.
Always replace and securely tighten the fuel cap after refuelling.
Whenever the tank is drained, this should be done outdoors.
7 UNPACKING AND ASSEMBLY
7.1 Unpack
Carefully lift the machine out of the box, remove any packing material.
7.2 Assembly
7.2.1
Install the bottom handlebar
Fit the bottom handlebar using the accompanying bolts. (Fig. 1)
7.2.2
Install the top handlebar
Fit the top handlebar, unfold the handlebar and secure it in the required position with the
knobs. (Fig. 2)
7.2.3
Mount the grass bag
Raise the ejection guard and slide the grassbag frame lugs into the locating slots each side of
the axle frame. (Fig. 3)
Always stop the engine and wait for the rollers to stop before removing and
replacing the grassbag.
8 OPERATION
8.1 Pre-Start Inspection
Make sure all safety guards are in place and all nuts and bolts are secure.
Check oil level in engine crankcase.