Cleaning and maintenance, Storage, Technical data – Powerplus POWXG5020 EARTH AUGER 1200W EN User Manual
Page 6: Noise, Warranty

POWXG5020
EN
Copyright © 2013 VARO
P a g e
| 6
www.varo.com
7.
Overloading the auger during drilling may cause it to stop turning. When this occurs, lift
the auger to reduce the drilling load on the motor, and allow drilling debris to be augered
out of the hole and resume drilling.
Do not place excessive body weight on the machine.
Do not use an ice auger bit in earth or an earth auger bit in ice. A different
style of auger bit is required for each type of drilling.
Do not use the auger in excessively rocky ground.
9 CLEANING AND MAINTENANCE
Warning !Before performing any work on the equipment, pull the power
plug.
Do not submerge earth auger in any liquids.
Do not use products that contain ammonia, chlorine, or abrasives.
Do not use chlorinated cleaning solvents, carbon tetrachloride, kerosene, or gasoline.
Keep earth auger body clean. Use a soft cloth dampened with a mild soap and water
mixture and wipe the earth auger body to clean.
10 STORAGE
In a high or locked place, out of children
’s reach;
in a dry place.
11 TECHNICAL DATA
Power supply voltage:
230-240V~ 50Hz
Power consumption:
1200W
Diameter auger bit
100mm
Drilling depth
560mm
Netto weight
12.8kg
12 NOISE
Noise values measured according to relevant standard. (K=3)
Sound pressure level LpA
90 dB(A)
Sound power level LwA
102 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
Vibration aw
5.5 m/s²
K = 1.5 m/s²
13 WARRANTY
This product is warranted as provided by law for a 24 months period effective from the
date of purchase by the first user.
This warranty covers all material or production flaws. It does not include defective parts
subject to normal wear & tear such as bearings, brushes, cables, and plugs, or