Select the desired temperature (button 2) – Electrolux LAVAMAT 64850LE User Manual
Page 10
2. If required, pour fabric softener into the
compartment marked (the amount
used must not exceed the
MAX mark in
the drawer).
Close the drawer gently.
Select the required programme by means of programme selector dial (1)
You can choose the right programme for any type of laundry following the descriptions on
the washing programme tables (see «Washing Programmes»).
Turn the programme selector dial to the required programme. The programme selector
determines the type of washing cycle (e.g. water level, drum movement, number of rinses)
and the washing temperature according to the type of laundry.
The pilot light of button
8 starts blinking.
The selector dial can be turned either clockwise or anticlockwise. Position to Reset
programme/ Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position , to
switch the machine off.
If you turn the programme selector dial to another programme when the machine is work-
ing, the yellow pilot light of button
8 will blink 3 times and the message Err is displayed
on the display to indicate a wrong selection. The machine will not perform the new selected
programme.
Select the desired TEMPERATURE (Button 2)
When selecting a programme, the appliance automatically proposes the default tempera-
ture provided for that programme.
Press this button repeatedly to increase or decrease the temperature, if you want your
laundry to be washed at a temperature different from the one proposed by the washing
machine.
By selecting position (Cold) the machine will wash with cold water. To be used for
extremely delicate items, such as curtains.
For the maximum and the minimum available wash water temperature, see «Washing pro-
grammes».
10
Daily use