Electrolux TC 180 - Manual (Page 17)

- 17 -
Wall mounting
Different wall materials require different types of mounting
hardware. Purchase mounting hardware suited to the walls
in your home. Use a minimum of 3 suitable fasteners to
attach your mounting console to the wall.
Before deciding on the wall mounting site, it is important
to check that the electrical lead will reach the wall socket
once the dryer is in place.
All electrical work performed on the dryer
should be done by a qualified electrician or
competent person.
If you are installing the dryer between wall-mounted cup-
boards, you should use the wall mounting console. If the
adjacent cupboards are more than 370 mm deep, don’t
forget to leave a space at least 30 mm wide on the left of
the dryer so that the door can open wide enough.
There should be a clear space at least 200 mm high bet-
ween the top of the dryer and the ceiling or any cupboard
above the dryer, to ensure adequate ventilation at the top.
3