Touch interface connection – Elo TouchSystems Elo 1000 Series 1715L User Manual

Page 8

Touch Interface Connection

Note:

Before connecting the cables to your touchmonitor and PC, be sure that the computer and

touchmonitor are turned off.

DC JACK

1. Connect one end of the power cord to the monitor and the other end to the outlet.

2. Connect one end of either the touchscreen serial(RS232) cable or the touch screen USB cable

(but not both) to the rear side of the computer and the other end to the LCD monitor. Tighten by

turning the two thumb screws clockwise to ensure proper grounding(USB cable does not have

thumb screws)

3. Connect one end of the video cable to the rear side of computer and the other to the LCD monitor.

Tighten by turning the two thumb screws clockwise to ensure proper grounding.

4. Press the power button on the front panel to turn the monitor power on.

2-10 Elo Touchmonitor User Guide

Power Cord

Video Cable

USB Cable

Serial Cable

Power Cord

Video Cable

USB Cable

For APR model only