Emerson EM2246HS User Manual
Page 8
7
TROUBLESHOOTING
PROBLEMS CHECK
No dial tone.
Is any plug disconnected from the modular phone
jack ?
Is any jack improperly wired? Use another phone to
test the jack.
Phone does not ring.
RINGER may be set to OFF?
Slide to
HI or LO position.
Static noise on line or cannot
hear calling party or calling party
cannot hear you.
Make sure the handset coil cord is connected
properly,or replace the handset coil cord.
Feedback or squealing when
using
SPEAKERPHONE.
Volume is too high. Reduce the
SPEAKERPHONE
VOLUME control setting.
Memory Dialing does not work.
Check if you have stored the numbers correctly
by pressing that memory location button(s).
Handset falls out of phone
base when wall mounted.
Handset clip was not installed properly for wall use.