Echo HCA-261 - Manual (Page 12)

10
D
ESCRIPTION
The ECHO product you have purchased has been factory pre-assembled for your convenience. Due to packaging
restrictions, some assembly of Model HCA-261 is required.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
CONTENTS
_____ 1 - Power Head
_____ 1 - Drive Shaft Assembly
_____ 1 - Gear Case Assembly
_____ 1 - Operators Manual
_____ 1 - Hedge Clipper Safety Manual
_____ 1 - Warranty Statement
_____ 1 - Warranty Registration Card
_____ 1 - Safety Glasses
_____ 1 - Shoulder Harness
_____ 1 - Blade Cover
_____ 1 - 2-Stroke Oil Sample, 2.6 oz.
_____ 1 - Scrench
_____ 1 - 4 mm Hex Wrench
_____ 1 - 8 mm/10 mm Wrench
EMISSION CONTROL
California Tier 2
The emission control system for these engines are
EM (Engine Modification).
An Emission Control Label is located on the engine.
(This is an EXAMPLE ONLY, information on label
varies by engine FAMILY).
PRODUCT EMISSION DURABILITY
The 300 hour emission durability period is the time span selected by the manufacturer certifying the engine
emissions output meets applicable California emissions regulations, provided that approved maintenance proce-
dures are followed as listed in the Maintenance Section of this manual.
AIR INDEX TAG
The Air Index Tag indicates, for purposes of
consumer awareness, how this product's emissions
compare to the standards enacted by the California
Air Resources Board.
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: YEHXS.0254CA
DISPLACEMENT: 25.4 CC
THIS ENGINE MEETS U.S. EPA PH1 AND 2000 AND
LATER CALIFORNIA EMISSION REGULATIONS FOR
S.O.R.E. REFER TO OWNER'S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.