Electrolux EWS 125410 A - Manual (Page 14)

3. Unscrew the filter to let the water flow
out.
4. When the container is full of water,
screw the filter again and empty the
container. Do steps 3 and 4 again and
again until no more water flows out
from the drain pump.
5. Unscrew the filter and remove it.
1
2
6. Remove fluff and objects from the
pump.
7. Make sure that the impeller of the
pump can turn. If this does not occur,
contact the service centre.
8. Clean the filter under the water tap and
put it back in the pump.
9. Make sure that you tighten correctly the
filter to prevent leakages.
1
2
10. Close the drain pump door.
CLEAN THE INLET VALVE FILTER
It could be necessary to clean the filter
when:
• The appliance does not fill with water.
• The appliance fills with the water for a
long time.
Warning! Disconnect the mains plug
from the mains socket.
To clean the filter:
1. Close the water tap.
2. Remove the inlet hose behind the appli-
ance.
3. Clean the filter in the valve with a stiff
brush or a towel.
14 electrolux