Emerson Radio AV50 - Manual (Page 38)

37
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING (
Ù
or
Ú
) repeatedly.
For automatic tuning, press and hold TUNING ( Ù or Ú )
until the frequency indicator starts to change automatically,
then release the button.
If an FM program is noisy
Press MONO/STEREO button on the front panel or
remote control so that “MONO” appears on the front
panel display. There will be no stereo effect, but the
reception will improve. Press the button again to restore
the stereo effect.
To improve reception
Reorient the supplied antennas.
Other Functions
This chapter describes how to use some functions
contained in the system. i.e. listen to the radio, how
to listen to an external source, how to select a listening
mode, etc.
Listening to the Radio
To listen to preset radio stations
Preset radio stations into the systems memory first
(see “Presetting Radio Stations” on page 18).
1. Press the TUNER/BAND button on the main unit
repeatedly until “FM” or “AM” appears on the front
panel display.
The last received station is tuned in.
2. Press the PRESET STATION UP/DOWN button
repeatedly to select the preset station you want. Each
time you press the button, the system tunes in one
preset station at a time.
You can also use the number buttons to select a
preset station number directly.
3. Adjust the volume level by pressing the VOL
Ù
or
Ú button on the remote control.
4. To turn off the radio, press the STANDBY button.