Sybase XTNDAccessTM - Manual (Page 9)

9
Infrared Setup for Windows 2000
For Windows 2000, no additional drivers or applications are required to use the
XTNDAccess IrDA PC Adapter. However, the following setup must be
performed in order for the Adapter to work with your computer.
1. Verify the serial connector of the Adapter is attached to a serial port of
the computer.
2. From the Start menu, select Settings, Control Panel, and then Add/
Remove Hardware.
3. Select Add/Trouble Shoot a device. Windows will search for Plug and
Play devices and then return a list of device options.
4. Select Add a New Device and click Next.
5. Select Choose the device and click Next.
6. From the list of Device Types, select Infrared devices and click Next.
7. Choose Extended Systems as the manufacturer.
8. Choose ESI-9680 JetEye Serial Infrared Device as the infrared device
and click Next. The Adapter will now begin to search for infrared devices
in range.
NOTE:
Additional installation instructions and troubleshooting tips are
included in the online documentation on the CD-ROM.