Ecom Instruments Ex-Pt 720 - Manual (Page 6)

24 25
Stainless-steel insertion probe
0600 9999 measurement range:-50 ... 400°C
0628 2232: accuracy: class A
Ex-Zones: 2, 1, 0
probe dimensions: >50mm x >4mm (w x ø)
sensor dimensions: >15 x >3mm (w x ø)
response time (99%):10 Sec.
7.4.3 Calibration instructions
The plastic handle withstands a temperature of approx. 200°C for
a short time. A long-term maximum of 90°C is recommended.
Please take this into account when calibrating the system or indi-
vidual components.
8. Repairs
Should repairs be necessary, then the conditions of ELEX V must
be complied with. We recommend that repairs be carried out in
the manufacturer’s factory as it is necessary for the unit to be
checked for technical and safety reasons.
9. Cleaning and maintenance
The unit should only be cleaned with a moist cloth or sponge.
Detergents or abrasive materials should not be used.
We recommend that the function and accuracy of the unit be
checked every two years by the manufacturer.
10. Guarantee & liability
For this product, ecom Instruments GmbH guarantees the function
and material for a period of two years under normal operating and
maintenance conditions.
The guarantee does not apply to products which are improperly
used, modified, neglected, damaged in accidents or exposed to
abnormal operating conditions.
Claims under the guarantee can be made by returning the defecti-
ve equipment to the factory. We reserve the right to repair, renew
the settings or exchange the device.
The above-mentioned guarantee conditions are the sole and only
right of the purchaser to compensation, are exclusively valid and
replace all other contract or legal warranty obligations. ecom
Instruments GmbH accepts no responsibility for special, direct,
indirect, accompanying or consequential damage as well as losses
including the loss of data which may arise through the use or
acquisition of the equipment independent of whether it was cau-
sed by violation of the warranty obligation, lawful or unlawful
action, action in good faith or any other action.
If in certain countries the limitation of a legal guarantee as well as
the exclusion or limitation of accompanying or consequential
damage is not permissible, it may be that the above-mentioned
limitations and exclusions are not valid for every purchaser. Should
any such clauses of these guarantee terms be declared null and
void or not realisable by a competent court, then the effectiveness
or enforceability of any of the other conditions of these guarantee
terms will be unaffected by the court decision.