beautypg.com

English instructions for use, How to use – Eureka 920 User Manual

Page 10

background image

ENGLISH

INSTRUCTIONS FOR USE

Before operating the vacuum cleaner, make certain that the dust bag

and filters are in the proper position.

1 Pull all of the power supply cord out from back of cleaner and plug

into electrical outlet.

Note: When pulling on power supply cord watch for a yellow line on

the cord. Then continue slowly pulling on cord till you see the red

line, stop. The red line indicates the end of usable cord.

2 Turn the ON/OFF suction control dial to switch the cleaner on.

3 To rewind the power cord, press the rewind button with foot and

guide the cord with hand to ensure that it does not whip causing

damage.

2 By moving the suction control dial, the suction power can be ad-

justed.

4 The suction control button on the hose handle is used to reduce suc-

tion for delicate work such as cleaning drapes or picture frames.

HOW TO USE

Floors should be cleaned regularly over heavily traveled areas, and once

a week over the entire area. Vacuum slowly, making several passes (for-

ward and backward), covering small areas at a time. The time required to

clean will depend on several factors - including type of floor and amount

of dirt.

CLEANING TOOLS

5

Combination Floor Turbo Nozzle: For carpets or hard surface

floors.

6

Hose Suction Control Button: For use to increase or decrease

suction when using cleaning tools.

7

Hard Floor Nozzle*: For any type of hard surface floor.

8

Tool Caddy*: To store cleaning tools. Clips on wand.

9

Combination Brush*: (stored on tool caddy on wand): For cur-

tains, draperies, cushions, fabrics.

10

Turbo Brush*: For upholstery and for stairs.

11

Crevice Nozzle*: (stored on tool caddy on wand): For crevices,

corners, baseboards, between cushions.

12

Combination Crevice Nozzle/Brush*: (stored in base of unit

under filter cover) For crevices, corners, baseboards, between

cushions. Brush rotates to allow use as brush or crevice depending

on task. *On some models.

* Depending on model

5.

1.

3.

4.

2.

6.

7.*

10.*

11.*

12.*

8.

9.*

*

Hose Suction

Control Button

10