Ericsson LBI-38732D User Manual

Page 41

SYSTEM/GROUP/CHANNEL SELECTION

In the following description of SYSTEM/GROUP/

CHANNEL SELECTION, the term group is used for both
group and channel.

The M-RK II SYSTEM/GROUP/CHANNEL knob and

the

pair are programmable for maximum

flexibility. If the SYSTEM/GROUP/CHANNEL knob is
assigned to select groups, then the

keys

are assigned to select systems. If the SYS-
TEM/GROUP/CHANNEL knob is assigned to select sys-
tems, then the

keys are assigned to

select groups. System, group and channel selection is
the primary function for these controls.

Either systems or groups can also be selected by

entering the select mode and following the selection
mode rules described earlier. Only the selection as-
signed as the primary function of the

pair

will be available for this method of direct selection. For
example, if system selection is the primary function of the

pair then only the system select mode will

be usable and direct group select will be unavailable. The
system select or group select modes are entered by
pressing SYS or GRP, respectively, from the standard
receive mode. Using

after entering a

particular selection mode in this manner is the secondary
function of these keys.

System Selection

Several methods, some of which depend on program-

ming, can be used to select a new system. These proce-