Operating instructions, Correct wrong – Euro-Pro VPW40 User Manual

Page 5

OPERATING INSTRUCTIONS

GETTING TO KNOW YOUR PRESSURE WASHER

CAUTION

Using the High Pressure lance

The high pressure lance may be used

alone or with the detergent applicator

bottle.

Add detergent to the bottle and then

attach the detergent applicator bottle to

the high pressure lance, just push it on

the end of the high pressure lance.

(Fig. 7 & 8) To remove the detergent

applicator bottle, lift the tab on the top

of the connector and pull off.

Lubrication: The pressure washer is

supplied with a closed lubrication

system, so no addition of oil is needed.
Checking the Water Intake Filter: The

water intake filter is located inside the

water intake connector. (Fig. 9).

Remove periodically and inspect for

any deposits that might accumulate

there.

Fig. 9

Fig. 10

Hose Connector

Water Intake

This will occur more frequently if your

water supply is very hard.

Fig. 6

Safety

Lock

Fig. 7

Fig. 8

CAUTION

When using your pressure washer,

always have it in the horizontal

position as shown below.

NEVER

have it in the upright position.

Maintenance & Cleaning

When you wish to stop using the

pressure washer temporarily, make

sure that the safety lock has been

engaged to avoid any accidental

operation. (Fig. 6)

Cleaning the Nozzles: If you notice that

the output pressure fluctuates, you may

have to clean the nozzles. Turn the unit

"Off". Unplug from electric outlet and

disconnect the water supply. Remove

the lance and hose with the trigger gun

from unit. Take the small metal pin

provided and insert into the nozzle end

to remove any obstructions. (Fig. 10)

9. Inlet Water Filter
10. Garden Hose Coupling
11. High Pressure Output
12. Handle
13. Pressure Washer
14. Detergent Applicator Bottle
15. Wheels (x2)
16. Handle Screw (x1 not shown)

1. High Pressure Lance
2. Trigger Gun
3. High Pressure Hose
4. High Pressure Hose Connector
5. Safety Lock
6. Trigger
7. On/Off Switch
8. Water Intake Valve

Illustrations may differ slightly from actual product.

Technical Specifications

Voltage:

120V., 60Hz.

Power:

12.5 Amps.

Pressure:

1300 psi. (max)

Flow Rate:

1.45 gpm

CORRECT

WRONG