Curtis SMPK8854B - Manual (Page 8)

8
Double click “Record” option and select “REC Quality” or “REC Volume”
z REC Quality: high quality, normal quality
z REC Volume: five options of volume level “+1, +2, +3, +4 and +5”
*The recorded voice file will be saved in “Music”
*If the player “Full Space”, it indicates that there is no space to save new file
3. Display Setup
① Backlight time: six options of 5 sec., 10 sec., 15 sec., 20 sec., 30 sec., and always on.
② Lum: five options of +1, +2, +3, +4 and +5, the higher level, the brighter.
③ Backlight mode: Normal and Power save modes.
4. Auto play set
There are text and jpeg under this file: 1s, 2s, 3s, 4s, 5s.
5. System Setup
Four sub-options: Language, about, Upgrade and Default set.
①
Languages: Simplified Chinese, Traditional Chinese, English, Korean, Japanese, and French
② About: Player information
③ Touch Screen Calibration
Click the three "+" shown on screen consecutively to complete the touch screen
calibration. You can press the "power" to quit the calibration at anytime. It
is recommended to set the touch screen calibration everytime when you operate
your player.
.
6. Power Off Time
There are six options of Power: Off, 10 min., 15 min., 30 min., 60 min. and 120 min.
7. Defaulted set
Click “yes” to format the player or click “no” to return to the main menu
*The recorded voice file will be saved in “Music”
*If the player “Full Space”, it indicates that there is no space to save new file
Firmware Update
The player can be upgraded or reset by the software program stored inside the installation CD.
1.
Insert the installation CD. Open the file \Firmware Upgrade tool\ConsumerUpdate 3.1.2.0\setup.exe
2. Install and run the program.
3. Click “Open” and select the firmware file (.rfw)
4. Click Update to start the firmware upgrade process
Note: Firmware upgrade is to improve and optimize the performance of the player, but the normal operation
would not be affected without the firmware upgrade. However, an inappropriate upgrade may damage the
player.
Appendixes
1. Video File Format Conversion
The file format WMV, RM, AVI, VOB or DAT could be converted to AVI format by a software program