Curtis SRCD202DG - Manual (Page 7)

7
Tuning the AM or FM Radio
Step 1: Adjust the Power Switch to AM or FM mode.
• Extend the FM antenna to improve FM radio reception. An AM
antenna is built into the unit. Adjust the unit to improve AM reception.
Step 2: Turn the Tuning Dial to the desired AM or FM station.
Playing a CD
Step 1: Open the CD door, and place a CD or CD-R/RW into the player.
Step 2: Adjust the Power Switch to CD mode.
Step 3: Press the Play/Pause Button to begin playing the loaded CD.
Programming a CD
Step 1: Open the CD door, and place a CD or CD-R/RW into the player.
Step 2: Adjust the Power Switch to CD mode.
Step 3: Press the Program Button.
Step 4: Press the Skip/Search Buttons to select the CD track to play.
Step 5: Press the Program Button.
Step 6: Repeat Steps 4-5 to program up to 20 total CD tracks.
Using the Auxiliary Input
Step 1: Connect a mini-phono 3.5mm Cable (not included) to the Auxiliary
Input on the unit and the audio output on an MP3 player.
Step 2: Adjust the Power Switch to CD mode.
• Audio played through the connected MP3 player will now be heard
through the unit.
Audio Source Required Connector
MP3 Player mini-phono 3.5mm Cable (not included)