Curtis SRCD114P - Manual (Page 10)

SRCD114P I_M (eng) • A5 • 11 July 2011 • AT
10
General Specifications:
Power Source: AC 120V~, 60Hz,
Power Consumption: 14 W
Audio Power: 2 x 1 W
Impendence of Speakers: 8 Ohm; 2W
Radio Band Coverage: AM 535 – 1710 kHz
FM 88 – 108 MHz
Close CD door complete.
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
GENERAL
Power does not
come on. AC line cord not plugged in. Plug in the AC cord.
RADIO
No sound. Set Function Switch to CD or
RADIO position.
VOLUME control at minimum
position. Turn the VOLUME control up.
Noise or sound
distorted on AM or
FM. Location or direction no good for
radio reception. Remove or turn the unit to a new
location or direction for better
radio reception.
CD Player
CD Skips Disc is dirty or badly scratched,
or pickup lens is dirty. If CD is dirty, clean as care and
maintenance section. If badly
scratched. CD cannot be played. Try
another discs. If lens is dirty, clean
with camera brush/ blower.
CD will not play Function Switch is not in CD
position.
Slide Function Switch to CD
position.
Disc is inserted incorrectly. Reinsert disc, ensuring center is
securely attached to spindle, with
label face up.
CD compartment door is not closed.
Function Switch had not set to
CD or RADIO position.
TROUBLESHOOTING GUIDE