Curtis TCR4964 - Manual (Page 10)

9
- To clear the memorized tracks,press the PROGRAM button
to enter the Program mode (PROGRAM indicator will blink)
and then press STOP button or open the CD door as explai-
ned.
- Programming is the ability to select the order in which a
series of tracks will be played.
- Each track may be stored in the program memory as many
times as desired (up to 20 tracks).
m When the disc is through playing, it will stop.
CLOCK SETTING
TO SET OR RESET THE ACTUAL TIME
On the STANDBY/ON mode, press and hold the
CLOCK/ADJ for 2sec. The display will show 24H.
Release the CLOCK/ADJ button twice and use MIN or
HOUR to select the CLOCK
To set the minute: press the MIN button until the
present minute appears in the display.
To set the hour: press the HOUR button until the
present hour appears in the display.
If you desired to startup 12H mode, press the
CLOCK/ADJ button once more, the display will show 12H.
The MINUTE and HOUR set procedure are same as above.
TO SET OR RESET THE ALARM TIME
Press ALM1 button, the time will flash in the display
and the ALM1 indicator light.
To set the wake minute: press the MIN button until the
desired wake minute appears in the display.
To set the wake hour: press the HOUR button until the
desired wake hour appears in the display.
Waiting for 5 seconds, the ALARM will be set successfully.
Press ALM2 button, the time will flash in the display
and the ALM2 indicator light.
To set the wake minute and hour, the procedure is the
same as the ALM1.
TO SET ALARM TO WAKE TO BUZZER/TUNER/CD
On the BUZZER position, when the setting alarm time
started, the alarm will ring.
On the CD position and also there CD disc in the CD
component , when the setting alarm time started, CD will
play automatically.
On the TUNER position, when the setting alarm time
started, TUNER will player automatically.
m
m
m
m
m
m
m
m
m
m
m
m
m