Curtis SDVD7040 - Manual (Page 14)

General Setup Page
ƔTV Shape: To set the aspect ratio of the
screen to match the current movie.
Ɣ Angle Mark: To turn on/off the angle
mark. When on, if multi-angle is available
in the current disc. The angle mark will appear
on the screen.
ƔOsd Lang: To set the language of on screen
display.
Ɣ Screen Saver: To turn ON/OFF the screen
saver. If set to on, when the disc stop playback
couple minutes, the screen saver will appear
on the screen.
Ɣ Last Memory: To turn ON/OFF the last
memory. When set to on, if playback the
currect disc. It will start playback from the
position where the disc was stopped last time.
Speaker Setup Page
Ɣ Downmix
Set the rear audio channels to stereo (hearing
the rear-left channel in Dolby 5.1 disc in left
speaker; rear-right channel in right channel)
or Lt/Rt mode (hearing rear-right and rear-left
channel in both right and left speakers).
Dolby Digital Step
ƔDual Mono:
Select and set the audio channels to play.
ƔDynamic:
Set the dynamic level or turn it off.
Video Setup Page:
Ɣ Picture: Set the picture quality of main unit.
Tv Shape ps
Angle Mark On
Osd Lang Eng
Screen Saver On
Last Memory On
- - General Setup Page - -
e g a P p u t e S l a r e n e G o T o G
r t S x i m n w o D
- - e g a P p u t e S r e k a e p S - -
e g a P p u t e S r e k a e p S o T o G
Dual Mono
Dynamic
- - p u t e S l a t i g i D y b l o D - -
Go To dolby digital setup
Picture
- - Video Setup Page - -
Go To Video Setup Page
Captions Off
13
System Setup
In stop playback, press the SETUP button
the setting menu will appear on the screen.
Use Direction buttons and ENTER button to
ƔCaptions: To turn on or turn off the captions.
Digital out Raw
Ɣ Digital out
1.SPDIF OFF: Turn off the digital output
2.RAW:
3.PCM: The output is encoded to PCM format. The output is in original format of the disc.
Ɣ Video Out: Set the picture quality of the
Video output signal through AV Out jack.
Video Out
acese menu.