Elite Screens 022111AS - Manual (Page 4)

4
Rev.022111‐AS
www.elitescreens.com [email protected]
7. Carefully smooth out the surface (preferably using latex gloves) to ensure that the screen is level with no
bubbles or ripples present.
8. Now that the material is perfectly flat, make sure that it is aligned well.
9. Use the included Scraper or a leveling brush to eliminate the residual moisture and make sure
that the material has been applied properly.
10. Allow material to stand unused for 2 to 3 hours so the adhesive can bond and set.