Curtis SB323 - Manual (Page 8)

During playback
• Press MUTE button to turn off the sound. Press again to resume
the sound.
• Press VOLUME+/- buttons to adjust the volume level.
• Press BASS+/- buttons to adjust bass level.
• Press TREBLE+/- buttons to adjust treble level.
• Press EQ button to switch between POP/ JAZZ/ CLASSIC /ROCK and
NORMAL.
Line in source
LINE IN sources may include:
Personal audio players
Personal computers or laptops
AUX connection:
1. Connect a stereo 3.5mm jack cable (supplied) between the
headphone or LINE/Audio output of the personal audio player and
the AUX 2 jack on the side of the unit.
2. Power on the unit and press source button repeatedly until the
indicator turns orange. Set your personal audio player/computer to
play.
NOTE: If there is no sound or if the volume is not loud enough, you
may increase the setting on the music/sound source.
To AUX 2 Jack
on the unit
During playback
• Press MUTE button to turn off the sound. Press again to resume
the sound.
• Press VOLUME+/- buttons to adjust the volume level.
• Press BASS+/- buttons to adjust bass level.
• Press TREBLE+/- buttons to adjust treble level.
• Press EQ button to switch between POP/ JAZZ/ CLASSIC /ROCK and
NORMAL.
Bluetooth source
Pairing
1.
Press “SOURCE” button on remote control or Source button on
side panel of sound bar until the indicator turns blue.
2. Turn off the Bluetooth functionality of other devices that are
paired with your unit. Only one device can be used with the
Bluetooth function at a time.
3. Turn on Bluetooth functionality on your Bluetooth device.
GB-14 GB-15
AUX 2
White
Red
AUX 1
POWER
RESET
Computer
MP3
Supplied audio
connection cable
Connect to the output
socket of external
audio devices (MP3,
Computer,ext.)
To AUX 1 Jacks
on the rear of the unit
2