Curtis PAT102 - Manual (Page 7)

1 . Auto Search
Search and install all channels automatically. This option overwrites all
preset channels.
a. Select [Auto Search] and press OK or RIGHT to start channel search.
b. To cancel channel search, press EXIT.
1. Aspect Ratio
2. Resolution
3. TV format
To access the menu, press MENU select [Search Channel]. The enu
provides options to adjust the earch hannel settings.
Select an option and press RIGHT/LEFT to adjust the setting .
Press EXIT
the enu.
You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9
Full Screen or 4:3 Full, 16:9 Pillar Box, 16:9 PanScan Auto to get the
maximum display when watching TV.
If the video does not appear correctly, change the setting. This setting is to
match the most common setting for HDMI.
[480i]: for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
(5) Channel Search
and M
S C
s
to exit M
[1080P]: for NTSC or PAL system TV.
2. Manual Search
Install new channels manually. This option adds new channels without
changing the current channels list.
a. Select [Manual Search] then press OK or RIGHT. The channel search
screen will appear.
b. Press the RIGHT/LEFT key to select the channel frequency
Enable Antenna Power if an external active antenna is connected.
(6) Time Setting
M then M
Press UP/DOWN to s
s
c. Press OK to start searching channels If a channel is found, it is saved and
added to the channels list. If channels can't be found, then exit the menu.
3. Country
Select your country of residence.
4. Antenna power
To access the enu, press MENU select [Time]. The enu provides
options to adjust the time settings.
elect an option and press RIGHT/LEFT to adjust the
setting . Press EXIT to exit the menu.