Emerson Radio PD6537 - Manual (Page 12)

1 1
PROGRAMMED PLAYBACK
You can program up to 19 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP button to stop playback before you begin the programming
steps below.
1.) Move the FUNCTION selector to CD, insert your disc in the player, close the
door, and wait until the total track number appears in the display.
2.) Press the CD PROGRAM button once. The
PROGRAM Indicator and program memory “00”
begin flashing in the display.
3.) Use the / buttons to select the first track to be
programmed. (Example: Track 08).
4.) When track number “08” flashes in the display, press
the PROGRAM button once again to enter the track
“08” in program memory number “01”. Track number
“08” disappears and “00” flashes again in the display,
indicating that you may now select a track to be
entered in program memory number “02”.
5.) Use the or buttons to select the next track to be programmed. When the
desired track number appears in the display press the PROGRAM button again
to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 19 tracks
in the program memory. When the memory is full,
the “– –” flashes in the LCD display
7.) To begin programmed playback press the PLAY/
PAUSE button. The LCD display will show the
first programmed track and playback will begin on
that track. The PROGRAM Indicator flashes.
PD6537_ib011303.p65 13/1/2003, 14:48 11