Curtis PLT7035 - Manual (Page 5)

Just need to connect the adaptor to charge
The first two times charging please keep about 6
hours, after that you just need 4 hours to charge.
【Remark】: This tablet using Built-in type polymer
battery, Charge must be to choose standard adaptor (Input:
AC100~240V 50/60Hz Max:180MA. Output: DC5V/1.5A),
this device without supply DC charging, USB interface can
charge, Choose USB interface to charger
During the charging, the battery icon will scroll
When finished charging, battery icon will become
green and stop rolling
In order to prolong the service life of the machine,
suggest use out battery power before charge it
【Remark】: 1. If you long time don’t to use this Tablet,
in order to avoid power consumption caused damage, pls
charge/play the battery once a month.
2、After low battery shut down, connect DC adaptor,
device will remind low battery, charging, need to wait
some time until the battery is enough power to enter into
main menu.
3. Device charging should be in standby status for
reach normal charging time.
Because with device and screen consumption, it may
cause longer charging time.
2.2 Connection with PC
Use USB cable to connect device to PC, device will
pop up the USB connection window, click Turn on USB
storage to connect to PC
5