Curtis IP1490 - Manual (Page 20)

TROUBLESHOOTING GUIDE
SPECIFICATION
19
PROBLEM SOLUTION POSSIBLE CAUSE
iPod
®
does not
dock properly
Using no or wrong iPod
®
insert. Make sure the dock insert is the
proper fit for your iPod
®
.
iPod
®
didnít install properly. Remove your iPod
®
from the dock
and check for obstruction on the
connectors in the dock and on your
iPod
®
. Then reseat it in the dock.
iPod
®
does not
respond to the
unit
iPod
®
is not installed properly. Remove your iPod
®
from the dock
and check for obstruction on the
connectors in the dock and on your
iPod
®
. Then reseat it in the dock.
iPod
®
is locked up. Please make sure your iPod
®
is
working properly before docking into
the unit. Please refer to your iPod
®
manual for details.
iPod
®
didnít
charge up
iPod
®
is not installed properly. Remove your iPod
®
from the dock
and check for obstruction on the
connectors in the dock and on your
iPod
®
. Then reseat it in the dock.
Power Requirement: AC 120V 60Hz
Frequency Range: FM 87.5 - 108 mHz
AM 530 - 1710 kHz
Power Consumption: 27 W
Max Output: 2.5 W