Warewashing – Electrolux 534188 User Manual
Page 2
Electric
Key Information
Warewashing
105
″ Multi Tank Conveyor Dishwasher
WT105
Supply voltage:
534186 (WT105BL208)
208 V/3ph/60Hz
534187 (WT105BR208)
208 V/3ph/60Hz
534188 (WT105BL240)
240 V/3ph/60Hz
534189 (WT105BR240)
240 V/3ph/60Hz
Dishwasher requires two separate electrical service connections.
Connection 1 for RINSE MODULE; Connection 2 for PREWASH AND
WASH MODULE. Refer to below table for Amp requirements.
Connection 1:
208 V/3ph/60Hz
71A
240 V/3ph/60Hz
62A
Connection 2:
208 V/3ph/60Hz
69A
240V/3ph/60Hz
62A
Total Amp Load:
208 V/3ph/60Hz
136.1A (44.4 kW)
240 V/3ph/60Hz
121.1A (44.4 kW)
Productivity racks per hour
350 racks / 6300 dishes
(max speed):
(average 18 dishes per rack)
Productivity racks per hour
250 racks / 4500 dishes
(min speed):
(average 18 dishes per rack)
Table to Table connection:
106-1/4
″ (2698 mm)
Number of Tanks:
3
Height with door open:
83-7/16
″ (2119 mm)
Charging hole size (width):
20-7/8
″ (530 mm)
Charging hole size (height):
19-3/4
″ (501 mm)
Shipping weight:
1327 lb (602 kg)
Shipping width:
129-15/16
″ (3300 mm)
Shipping depth:
40-15/16
″ (1040 mm)
Shipping height:
81-1/8
″ (2060 mm)
Shipping volume:
148 cu.ft (4.18
3
)
Noise level:
<70 dBA
Unit predisposed to accept external detergent dispensers, detergent
probes and rinse aid dispensers.
Exhaust Requirements
Unit supplied as standard with extended vent hoods
(can be removed during installation if not required).
Exhaust extraction not more than 177 CFM (300m³/h)
Refer to installation diagram for minimum exhaust hood
installation height .
Water
Inlet Water supply pressure:
22 – 102 psi (150 – 700 kPa)
Inlet Cold Water Supply Temperature
39 – 59 °F (4 - 15 °C)
for pre wash section:
Inlet Hot Water Supply Temperature
140 °F (60 °C)
for wash and rinse section:
Inlet Water supply hardness:
4-8 gpg (7-14 °fH) max
Incoming Cold Water line size
G 3/4
″
(pre wash):
Incoming Hot Water line size
G 3/4
″
(wash and rinse section):
Drain line size (pre wash section):
G 1-1/2
″
Drain line size (wash section):
G 1-1/2
″
Drain line size (rinse section):
G 1-1/2
″
Hot Water consumption: Gallons/hr:
87 gal/hr (330 liters/hr)
Water consumption/rack:
0.3 gal/rack (0.75 l/rack)
Pre wash Temperature:
< 105 °F (<40 °C)
Pre wash tank size:
11.8 gal (45 liters)
Pre wash pump power:
0.5 hp (0,37 kW)
Pre Wash water flow:
39 gal/min (150 l/min)
Wash Temperature:
160 – 172 °F (71-78 °C)
Wash tank size:
40 gal (150 liters)
Wash pump power (top wash arms):
3 hp (2.2 kW)
Wash pump power (lower wash arms): 1.5 hp (1.2 kW)
Power Rinse Temperature:
160 – 172 °F (71-78 °C)
Power rinse tank size:
6 gal (23 liters)
Rinse pump power:
0.4 hp (0.32 kW)
Final Rinse Temperature:
180 – 194 °F (82-90 °C)
Final Rinse water flow:
79 gal/min (300 l/min)
Hot water booster capacity:
3 gal (11.3 liters)
Initial fill Hot Water requirements:
40 gal (150 liters)
Initial fill Cold Water requirements:
11.8 gal (45 liters)
Warewashing
105
″″″″″ Multi Tank Conveyor Dishwasher WT105
10-29-08