Curtis RACP1206 User Manual

Page 13

Model

Lowest Voltage of
CPU Emitting Signal

Rated Voltage

RG51B/(C)EU, RG51B16/(C)E,RG51B31/(C)EU

。

-5 C 60 C( )

3.0V(Dry batteries R03/LR03×2)

2.0V

Remote Controller Specifications

1. Operating Mode: AUTO, COOL, DRY, HEAT(Cooling only
model without), and FAN.
2. Timer Setting Function in 24 hours.

。

3. Indoor Setting Temperature Range : 17 C~30 C(62 F~88 F).
4. Full function of LCD (Liquid Crystal Display)

Environment

Signal Receiving
Range

Performance Feature

Function buttons

CAUTIONS

Do not mix old and new batteries or batteries of a different type.
Do not leave the batteries in the remote controller if it is not going
to be used for 2 or 3 months.
Dispose of the old batteries in the special containers to be found
in the sales outlets.

TEMP DOWN Button

Push this button to decrease the indoor temper-

ature setting in 1 C(2 F) increments to 30 C(88 F).

TEMP UP Button
Push this button to increase the indoor temper-

ature setting in 1 C(2 F) increments to 17 C(62 F).

Model: RG51B14/(C)E,
RG51B16/(C)E,
RG51B18/(C)E,
RG51B19/(C)E-M,
RG51B20/(C)E
RG51B31/(C)E
RG51B30/(C)E.
NOTE:
RG51B16/(C)E ,RG51B18/(C)E
models have no SWING feature;
RG51B18/(C)E ,RG51B19/(C)E-M,
RG51B20/(C)E models have no
LED DISPLAY feature.
RG51B19/(C)E-M model has no
MED FAN feature.
RG51B31/(C)E model ECONO-
MY button is instead of SLEEP
button.
RG51B30/(C)E model has no
MED FAN and SWING features.

Each time the button is pressed, the operation
mode is selected in the sequence of the following:

MODE Button

TEMP

AUTO
COOL
DRY
HEAT

FAN
HIGH
MED
LOW

MODE

FAN SPEED

SWING

TIMER ON

ECONOMY

ON/OFF

TIMER OFF

RESET LOCK

SET TEMPERATURE( C)

LED
DISPLAY

SWING Button(on some models)
Used to stop or start louver movement and
set the desired up/down airflow direction.

RESET Button
Once the recessed RESET button is pressed,
all of the current settings will be cancelled
and the controller will return to the initial settings.

ON/OFF Button
Operation starts when this button is pressed
and stops when the button is pressed again.

NOTE: Heat mode is for Cooling & Heating models only.

AUTO

COOL

DRY

HEAT

FAN

Used to select the fan speed in four steps:
Auto Low Med High

FAN SPEED Button

-41 F~140 F

NOTE:

Temperature setting display:

Celsius scale( C):

Fahrenheit scale( F):

RG51B14/(C)E, RG51B16/(C)E,RG51B18/(C)E,RG51B31/(C)E,RG51B19/(C)E-M,

RG51B20/(C)E,RG51B25/(C)E,RG51B27/(C)E,RG51B30/(C)E.

RG51B/(C)EU, RG51B1/(C)EU,

RG51B30/(C)EU,RG51B32/(C)EU,RG51B31/(C)EU.

RG51B17/(C)EU,RG51B26/(C)EU,

RG51B1/(C)EU, RG51B14/(C)E,RG51B31/(C)E

RG51B19/(C)E-M, RG51B20/(C)E,RG51B30/(C)EU

RG51B25/(C)E, RG51B26/(C)EU;RG51B27/(C)E,

RG51B30/(C)E.

TIMER ON Button

Press this button to activate the Auto-on time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until
the time setting is 0.0.

ECONOMY(SLEEP) Button

Select this function during the sleeping time. It
can maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only .

RG51B17/(C)EU, RG51B18/(C)E,RG51B32/(C)EU

Some models have no MED FAN feature.