Curtis DVBTUK-T3 - Manual (Page 22)

Before a scan is started or when a scan is started and waiting for SI
information the in formation parameters will be filled with “----” (dashes) .
3.4.4) Info For Manual Scan Menu
When changing the connection settings, the FE connection settings
will changed and the bars updated to show the current FE information.
To start a service scan the SCAN option must be selected and toggled to
“Started”. The user must then wait for the service information to be found
and displayed.
While waiting for the service information and the services to be
added the following will be displayed in the preview windows:
PLEASE WAIT …
After the scan has completed the scan option will automatically toggle
back to “Stopped”.
The quarter screen preview will show the first service from the new
services that have been added, along with the service name and
provider name of the previewing service.
The user can then skip through the found services by using the P+ and
P- keys.
If no new services are added then the preview window will stay
blanked and no service or provider name will be displayed. The
following will be displayed in the preview window:
NO SERVICES ADDED
17
Information:
Modulation The modulation type of the locked stream. The values can
be QPSK, QAM16 or QAM64.
FEC The FEC rate of the locked stream. The values can be 1/2,
2/3, 3/4, 5/6 or 7/8.
Network ID The network id of the locked stream.
Transport ID The transport id of the locked stream.
Services Found Number of services found on the locked stream after
a scan.
Services Added Number of services added to the system after a scan.
If some of the services found are already stored then
they will not be re-added.
Signal Level A bar indicator shows the current signal level.
Quality Bar indicator to show the current bit-error-ratio and text
displaying the quality.
:90X128mm