Curtis CR3988 - Manual (Page 14)

13
OPERATION (CONTINUED)
1 2
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
3 4
NOTES:
FAQS:
How do I clear the memory?
Press the POWER button "1" to turn
the unit on; the POWER indicator will
light. Slide the FUNCTION switch "2"
to the CD position. Press the PROG.
button "3" once; "P 01" will appear in
the display and the PROG. indicator
will blink.
Within 7 seconds, select the first track
to be played back using the SKIP "1"
or "2" button, then press the PROG.
button "3" again. Repeat this step to
program additional tracks up to a
maximum of 20 tracks
Press the PLAY/PAUSE button to
begin playback. The unit will play all
the tracks in the order you
programmed them, then the prog.
indicator will light solid.
Adjust the VOLUME control "1" as
desired. When the disc is through
playing, it will stop. Press the STOP
"2" button to stop the disc before it is
finished.
1. To skip forward or backward through the programs, press the SKIP
button. When the disc is through playing, it will stop.
2. Programming is the ability to preselect the order in which a series of
tracks will be played.
When at the STOP mode, press the PROG. button to enter the Program
mode, and then press the STOP button or change the position of the
FUNCTION switch.
SKIP
1
2
1
3
SKIP
1
1
2
3
SKIP
1
SKIP
1 1
2