Ericsson R380 User Manual
Page 3
RSA SecurID Ready Implementation Guide
3
•
= User Setup
To activate RSA SecurID on your mobile phone, you must obtain an activation license from your administrator (see
previous steps). The license consists of approximately thirty alphanumeric characters that you must key in to your
mobile phone.
To activate RSA SecurID on your Ericsson R380s Smartphone:
1. Make sure that the phone is on and in standby mode.
2. Open the flip, and tap the Extras tab:
3. Tap
System.
4. Tap
Preferences, then Messaging, and then One-Time Passcodes.
5. Tap
Initialise RSA SecurID. If an activation license is already installed on the phone, the activation program
prompts you to confirm the removal of the previous license. If you are not sure whether you want to remove the
previous license, select No, and consult your administrator.
6. Tap
the
Activation License input field. The activation license input view appears, showing a software keyboard
at the bottom of the screen.
7. Use the keyboard to enter your activation license. The license is not case-sensitive. However, do not enter a
space or carriage return at the end of the activation license string. If you do, the activation license will be rejected.
8. Tap to return to the Initialise RSA SecurID view, then tap OK to continue. If you enter a correct license, the
message, “RSA SecurID has been successfully initialized” appears briefly. RSA SecurID Software Token is
activated on your mobile phone. If you see this message, do not continue on to the next step. If you enter an
incorrect license, the message, “Activation license incorrect” appears. If you see this message, continue on to
Step 9.
9. At the message, “Activation license incorrect,” tap OK to return to the Initialise RSA SecurID view.
10. Tap the activation license text to access the software keyboard. The incorrect license remains in the input field so
you can compare what you entered with the correct activation license.
11. Repeat Steps 7 and 8 to re-enter the activation license.