Curtis DVD5028 - Manual (Page 17)

The Setup Menu System
signals will be output from the Coaxial Output jack or Optical Output jack. This
player’s digital output jacks are designed for a connection to a Dolby Digital, DTS ,
or MPEG receiver or decoder.
SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel
digital stereo amplifier; When playing a disc recorded with Dolby Digital and
MPEG audio formats, audio signals will be modulated into a 2-channel PCM signal,
and it will be output from the Coaxial Output jack or Optical Output jack.
d) VIDEO
SETUP
BRIGHTNESS
Use the Up and Down arrow button to move the scroll and adjust the brightness.
CONTRAST
Use the Up and Down arrow button to move the scroll and adjust the contrast.
HUE
Use the Up and Down arrow button to move the scroll and adjust the hue.
SATURATION
Use the Up and Down arrow button to move the scroll and adjust the saturation.
e) SPEAKER SETUP
DOWNMIX
Use the Up and Down arrow button to move the scroll and adjust the saturation.
LT / RT: Choose this setting, it will be sound like in a movie theatre if the original
movie the disc was recorded from was encoded in the Pro Logic Dolby Digital
format.
STEREO: Choose this setting, when 5.1-channel sound playing, two channels of
signals will be output from the left and right soundtrack; when 2-channel sound
playing, stereo signal will be output.
VSS: Choose this setting, when a disc recorded with 5.1-channel sound format
playing, the fictitious surround soundtracks effect will be heard from the main
soundtrack.
OFF: Choose this setting to output the 5.1-channel sound.
SUBWOOFER
There are two settings in this option: OFF / ON. When ON is chosen, the player will
auto detect the subwoofer input then output it. When OFF is chosen and the subwoofer
input will not be output.
BASS MODE
There are three settings in this option: ALL LG SPK, ALL SM SPK, MIXED SPK.
You can adjust subwoofer volume in this option
CENTER DELAY
You can adjust center delay in this option.
REAR DELAY
16