Curtis LCD4299A - Manual (Page 19)

T V SETUP
16
PICTURE AUDIO SETTINGS CHANNELS
2D to 3D
Set some 3D sources to 3D mode
Off
3D Mode
L R Swap Off
L
Depth
3D to 2D Settings
0
Menu Exit Back Exit Select Move
Color Temperature
Change the overall color cast of the picture.
Warm
Cool
Normal
Produces a red-hued image.
Produces a gentle blue-hued image.
Produces a vivid image.
Aspect Ratio
Adjust how the picture fills the screen.
Normal Original 4:3 Aspect Ratio is preserved by adding black bars.
Wide Use to watch wide screen(16:9) content.
Zoom Expands image to fill screen. Top and button maybe cut off.
Cinema Stretches image at edges but keeps a clear image in the center.
Noise Reduction
Set options to reduce video noise. Only VGA/HDMI is disavailable.
Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
Strong Detect and reduce enhanced video noise.
Adaptive Contrast
Set advanced contrast options. Only VGA is disavailable.
Adaptive Contrast
Automatically adjust picture detail and brightness. Press【◄】/【►】button to select (Off/On).
Dynamic Contrast Ratio
Enhance contrast ratio between light and dark areas of picture. Press【◄】/【►】button
to select(Off/On).
3D Settings
Adjust 3D mode, 2D to 3D, 3D to 2D settings to the current picture When no signal,3D Settings
menu is not available,Press ►button to enter.