Electrolux Z3040 Series - Manual (Page 6)

Filter Maintenance Schedule
Maintenance Schedule is also located on back side of dust cup.
Brush Roll
Filter Screen
Foam Filter
EF187
ZE090 Belt
HEPA Filter
EF186
align to
open/close turn to
lock
FOAM FILTER & FILTER SCREEN – Wash & Clean
DUST CUP – Empty
6 MONTHS
MONTHLY
WEEKLY
EACH USE
HEPA FILTER – Replace
BRUSH ROLL – Clean
BELT – Replace a worn, cut or out-of-shape belt
LINE UP WHITE NOTCHES
AND REPLACE FILTERS
LINE UP LID AND CLOSE WASH & DRY THOROUGHLY TURN LID , REMOVE FILTERS
& FILTER SCREEN
CLOSE LID UNTIL IT CLICKS LOCK TABS & SNAP HANDLE EMPTY PULL UP HANDLE & REMOVE
REINSTALL FILTERS LINE UP LID AND CLOSE REMOVE FOAM AND REPLACE HEPA FILTER TURN LID & REMOVE
align to
open/close turn to
lock
!
!
Assemble the vacuum before using. Moving parts. Make sure ON/OFF switch is in OFF (O) position before plugging in power cord.
4
Proprietary Carpet Conditioning and Air Freshening Materials
After using proprietary carpet conditioning powders, it is recommended that the filters be changed. Some of these
preparations contain substances which if left in the vacuum for extended periods could damage the plastic mouldings which
form the structure of the vacuum.
Many air fresheners, household deodorants, sprays and polishes contain a highly flammable gas propellant. Because
of this, it is particularly important that these products are used strictly in accordance with the relevant manufacturer’s
instructions.
It is essential that none of the above products are sprayed directly into the vacuum or any of its filters, hose assembly,
dustbag chamber or dust cup.
Due to the powerful motor in this vacuum, you may notice a higher noise level than with your previous model. You
may also notice that it picks up considerably more dust than your old model and, as a result, you may need to empty
the dust cup more frequently.